جديد صندقة البلاطة BAUPROP SUPPORTS 20kN 3.0-5.5m

The BAUPROP 20 steel prop with infinitely variable height adjustment and self-cleaning thread is designed for the transfer of vertical compression loads in temporary floor props and in beam and frame formwork systems. Its construction consists of two tubes: an inner tube with holes and an outer tube with threads, as well as an adjusting nut, a locking pin and two plates that form the upper prop head and the lower prop base. The whole is hot-dip galvanised and the nut is also powder-coated in a characteristic orange.

The prop has a minimum load-bearing capacity of 20kN in accordance with EN-1065 and a high safety factor and is Sigma certified by SIGMA KARLSRUHE GmbH.

The prop has an external thread with a self-cleaning mechanism that allows the prop height to be adjusted continuously over the entire operating range. When the prop is lowered as far as possible, a safety distance is maintained to protect the installer's hand from being crushed.

BAUPROP PROP 20 3.0m
Dimensions: 172 - 300cm
Scale: 16.8kg

BAUPROP PROP 20 3.5m
Dimensions: 195 - 350cm
Scale: 18.80kg

BAUPROP PROP 20 4.0m
Dimensions: 221 - 400cm
Scale: 22.50kg

BAUPROP PROP 20 5.5m
Dimensions: 300 - 550cm
Scale: 37.50kg
__________
Do you have any questions?
You are welcome to contact our consultant by phone, WhatsApp or e-mail:

Michal Tobola
Mobile / WhatsApp: إظهار قائمة الأسماء

Translated with DeepL.com (free version)