ماكينة مشغولات معدنية أخرى CABYCAL lpp

This 3-axis CABYCAL LPP was manufactured in 2018. It features a maximum reciprocator axis stroke of 2,200 mm and a production capacity of up to 90 racks per hour. The system includes a Nordson powder coating application with 4 automatic guns and a comprehensive pre-treatment tunnel. If you are looking to get high-quality powder coating capabilities, consider the CABYCAL LPP automated powder coating line we have for sale. Contact us for further details.
Location: ES
brand: CABYCAL
Table Load: 35 kg
Type: Overhead monorail conveyor (frequency inverter driven)
Speed range: 0.75 to 1.2 m/min (design speed 0.75 m/min)
Max vertical stroke: 2,200 mm (adjustable)
Vertical speed: 0.14 to 0.6 m/s (adjustable)
Positioning movement: Manual adjustment
Workpiece material: Metal
Max part dimensions (L x W x H): 1,000 x 100 x 2,000 mm
Gauge clearance (W x H): 300 x 2,200 mm
Max load: 35 kg per 800 mm hanger rack
Production capacity: 56 racks/hour at 0.75 m/min; 90 racks/hour at 1.2 m/min
Brand/Model: Nordson Encore LT
Reciprocators: 2x electronic reciprocators
Automatic guns: 4x automatic powder guns with individual control modules
Powder booth and recovery: Booth with recovery cyclone and absolute filter with automatic pulse-jet cleaning
Air velocity at openings: approx. 0.5 m/s
Pre-treatment tunnel: 5-stage cleaning tunnel with chemical baths, vapor extraction fan, advance solenoid valves
Drying oven: Gas-fired, internal heat exchanger, 2x air recirculation fans, 2x air curtain fans
Curing (polymerization) oven: Gas-fired, internal heat exchanger, 2x air recirculation fans, 1x air curtain fan, 1x top extraction fan
Oven burners: BALTUR (Code 17080010 / BTG 15 5060HZ)
Max operating temperature: 180°C
Electrical connection: 400 VAC, 3-phase + neutral + ground, 50 Hz
Total electrical power: 90 kW (approx. 80 kW line requirement)
Electrical consumption: ~80% (excluding application booth)
Heating fuel: Natural gas
Thermal power: 520 kW total (650 kW installed capacity / ~420 kW consumption with heat recovery)
Compressed air: Clean, dry air at 6–8 bar (2x 1/2" connections + 1x 1" connection for application)
Reverse osmosis water: 1-point distribution (TTS) at 2–3 bar; ~600 l/h via 2" inlet
Building requirements: 4–5 roof penetrations for extraction chimneys; wastewater sump/trench recommended for pre-treatment drainage
Conveyor
Reciprocator (application axis)
Part capacity
Powder application system
Line components and thermal equipment
Utilities and technical requirements
Additional equipment
1x Manual powder gun with integrated rack control unit
1x Complete sieving unit with 10 m feed hose
1x 36 kg powder hopper
1x Recovery venturi pump