جديد ماكينة صهر البيتومين Asphalt Decanting Unit

6T Burner-Heated Asphalt Decanting Equipment

Operating Conditions
- Storage medium: Asphalt; Heating method: Burner; Operating temperature: 200℃

Main Dimensions & Structure
- Tank body dimensions: 9.2m (L) × 2m (W) × 2.25m (H), 1 unit, excluding insulation layer
- Overall dimensions of the whole equipment: 11.5m (L) × 2.1m (W) × 2.4m (H)
- Self-weight of the whole equipment: 9 tons
- Tank body steel plate thickness: Bottom plate δ6, tank body δ5, 1 unit, internally reinforced to ensure structural strength
- Whole equipment base: 10cm×10cm square tube, 1 set, designed for safe transportation
- Ladder: 3cm×3cm square tube, 1 set

Heating System Components
- Thermal oil heating pipe: DN57, 1 set, total length 100 meters
- Heating pipes on both sides of the tank body: DN114, 4 sets, total length 70 meters
- Heating chamber: DN380, 2 sets, total length 18 meters
- Tank body insulation layer: Rock wool with color steel tile cladding, 1 batch, 50mm thickness on single side
- Burner: 300,000 kcal, 2 sets, Riello brand
- Diesel tank: 70 liters, 1 set

Asphalt Conveying & Hydraulic System
- Asphalt barrel channel: 1m (H) × 0.8m (W), 2 channels, 15 barrels can be pushed through a single channel, total capacity 30 barrels
- Hydraulic cylinder: 1.5m length, 2 sets
- Barrel inverter: Welded part, 2 sets
- Hydraulic pump unit: 5.5KW, 1 set
- Asphalt pump: DN50, 1 set, screw pump, 5.5KW
- Thermal oil pump: DN65, 1 set, centrifugal pump, 7.5KW
- Thermal oil valve: DN50, 2 sets
- Asphalt valve: DN50, 1 set
- Low-level asphalt oil extraction port: DN50, 1 port
- High-level asphalt oil extraction port: DN50, 1 port

Auxiliary Equipment
- Temperature gauge: Measuring range 0-300℃, 1 set
- Hoisting machine: 1.5KW, 1 set, load capacity 1 ton, 380V power supply
- Hoisting frame: 1 set
- Distribution box: 1 set, cabinet type
- Electronic limit float valve: 1 set

General Requirements
- The overall appearance shall be neat and aesthetically pleasing, with tight sealing and reliable anti-corrosion and waterproof treatment.
- All asphalt pipelines and the tank body must pass pressure tests to ensure no leakage.
- The inlet and outlet flanges shall be aligned in consistent height and width, ensuring connected pipelines are horizontal and vertical.
- All components shall be welded firmly; all guardrails and ladders shall be safe and stable.
- The bottom base of the tank shall provide stable and reliable support.